

This webinar is prerecorded
Free | online | Domonkos Szeker
Register for FREE and watch at your convenience
This webinar is prerecorded. Once you’re registered, you will get lifetime access to the webinar recording!
There are a number of advantages to using rapid control prototyping (RCP), such as engineers can quickly design, optimize, and test new control strategies in a real environment in order to identify and resolve potential problems earlier in the process. To top it all up, RCP is a cost-effective way to prototype and shorten time-to-market, as it is an automated process that eliminates time-consuming and error-prone hand-coding tasks.
During this webinar, we will concentrate on the most efficient way to test your Simulink control designs in real-time while connecting to hardware.
Our Application Engineer – Domonkos Szekér – will explain how easily you can configure and run the controller algorithm on a real-time target computer and communicate through high-speed I/O interfaces to power electronics, sensors, and the motor.
During this Webinar, you will learn how to:
- Support your motor control workflow in Simulink
- Use Experimental data for motor parameter estimation
- Proceed from open-loop simulations to closed-loop, real-time tests of motor controls
- Review performance of closed-loop motor control algorithms in Simulink
- Deploy and test controls algorithm in real-time on Speedgoat hardware
- Connect and interact with motor and inverter hardware from Simulink
- Estimate parameters using data collected from the motor
- Log data and tune parameters while the test is running in real-time
- Automate real-time testing tasks with Simulink and Speedgoat hardware
Agenda
- Spin PMSM in Open-Loop
- Review FOC Algorithm and
- Test in Real-Time
- Estimate Motor Parameters using Experimental Data
- Automate Real-Time Testing
Recommended for:
- Engineers who are eager to learn how to design motor control
- Engineers looking for Rapid Control Prototype solutions
- Control Design engineers interested in the benefits of Model-Based Design
- Motor control engineers who are about to shorten the development time
- Motor control engineers looking for Real-Time testing solutions
- Control design engineers looking for Motor Parameter Estimation solutions
- Control Design engineers are interested in how Simulink can speed up the development
Rapid Control Prototyping for Electric Motors with Simulink Real-Time
About the Speaker
Register now and start learning!
This webinar is prerecorded. Register for an access link!
Free | online | Domonkos Szeker
Join our upcoming webinars!
Recordings are nice, but it is not the same as joining a live event. In order to be notified about our upcoming webinars, training courses, and other events, subscribe to our newsletter.
Registration
Rapid Control Prototyping for Electric Motors with Simulink Real-Time
Please fill out the form below to register.